Inateck P7 - Code 32

42
Operations are as below if you want to enable VIN:
1. Read the "Enter Setup" barcode;
2. Read the "Enable VIN" barcode;
3. Read the "Exit with Save" barcode.
Enter setup
Exit with save
Exit without save
3.4.6 Code 32
Code 32, usually applied to Italian medical products, is a special form of Code 39. Inateck P7
defaults “Disable Code 32”.
Enable Code 32
（*）Disable Code 32
The first character of Code 32 is fixed to be “A”. Decide whether to output the first character of
Code 32 via selecting correspondent barcode to scan. Inateck P7 defaults “Disable first character
of Code 32”.
Enable first character of Code 32
（*）Disable first character of Code 32