Inateck P7 - Start;Stop Transmission; Code 11; Enable;Disable Code 11

34
3.1.2. Start/Stop Transmission
Decide whether to include Start/Stop characters in the data being transmitted by scanning
relevant barcodes below, with Transmit Codabar Start/Stop Characters as default.
(*)Transmit Codabar Start/Stop Characters
Do not Transmit Codabar Start/Stop Characters
For example: Do Not Transmit Codabar Start/Stop Characters.
1. Read the "Enter Setup" barcode;
2. Read the "Do Not Transmit Codabar Start/Stop Characters" barcode;
3. Read the "Exit with Save" barcode.
Enter setup
Exit with save
Exit without save
3.2 Code 11
3.2.1. Enable/Disable Code 11
Decide whether to include Enable/Disable code 11 in the data being transmitted by scanning
relevant barcodes below, with disable Code 11 as default.
Enable Code 11