Inateck P7 - Telepen; Enable;Disable Telepen; Checksum Verification

59
Enter setup
Exit with save
3.17 Telepen
3.17.1 Enable/Disable Telepen
Decide whether to enable Telepen by scanning correspondent barcode below. Inateck P7 defaults
to “Disable Telepen”.
Enable Telepen
（*）Disable Telepen
3.17.2 Checksum Verification
Decide whether to verify the Telepen by scanning correspondent barcode below. Inateck P7
defaults to “Do Not Verify Telepen”.
Verify Telepen
（*）Do Not Verify Telepen
Enter setup
Exit with save