Inateck P7 - 4.3 Customized Settings of Prefix and Suffix Code of Barcode

64
4.3 Customized Settings of Prefix and Suffix Code of Barcode
Customized 1 to 32 digits prefix / suffix setting is supported by Inateck P7. Though Inateck P7
takes recovering the prefix and suffix as default, Hiding the prefix and suffix is also available
through scanning correspondent barcode. Supported prefix/Suffix number can be seen in
Appendix 1.
Prefix Setting
Suffix Setting
（*）Recover Prefix
Hide Prefix
（*）Recover Suffix
Hide Suffix
Steps to set “#%1”as suffix and “!@D” as prefix are as below:
1). Read the "Enter Setup" barcode;
2). Read the "Prefix Setting" barcode;
3). Read the "#" barcode (see in Appendix 1);
4). Read the "%" barcode (see in Appendix 1);
5). Read the "1" barcode (see in Appendix 1);
6). Read the "Suffix Setting" barcode；
7). Read the "!" barcode (see in Appendix 1);
8). Read the "@" barcode (see in Appendix 1);
9). Read the "D" barcode (see in Appendix 1)；
10). Read the "Exit with Save" barcode.
Note: Inateck P7 will recover the prefix and suffix automatically once the Prefix/Suffix Setting is
finished.