Inateck P7 - Ean-8; Enable;Disable EAN-8; Checksum Verification

44
Enter setup
Exit with save
Exit without save
3.6 EAN-8
3.6.1 Enable/Disable EAN-8
Decide whether to read EAN-8 by scanning correspondent barcode below. Inateck P7 defaults
“Enable EAN-8”.
（*）Enable EAN-8
Disable EAN-8
3.6.2 Checksum Verification
Decide whether to transmit EAN-8 Checksum via selecting correspondent barcode below to scan.
Inateck P7 defaults “Transmit EAN-8 Checksum”.
（*）Transmit EAN-8 Checksum
Do Not Transmit EAN-8 Checksum