Inateck P7 - 4.5 Letter Case Setting

67
4.5 Letter Case Setting
Inateck P7 can change all the letter cases of barcode into uppercase or lowercase. Though it takes
“Not to Alter the Letter Case of barcodes” as default, letter case of barcodes can be altered
through scanning correspondent bar code below.
Alter to Uppercase
Alter to Lowercase
（*）Not to Alter the Letter Case
Steps to alter letter case of barcodes into uppercase are as below:
1). Read the "Enter Setup" barcode;
2). Read the "Alter to Uppercase" barcode;
3). Read the "Exit with Save" barcode.
Enter setup
Exit with save
Exit without save