6
The settings of scanning mode, barcode type and data transmitting format are made by scanning
correspondent barcodes.
★ Screen barcodes supported
★ Numerous decoding types
★ Super-fast decoding speed
★ Dustproof and anti-drop design
★ Completely self-owned intellectual property
★ Extremely comfortable operation design
★ Up to one million times’ clicking life
★ Vibration Notification
★ 433MHz wireless transmission range up to 400 meters
★ Bluetooth transmission range reaches over 40 meters
★ 2600mAh large capacity lithium ion battery
★ Long battery life ensured by low energy consumption technology
Introduction of Key Function
Power Switch: Toggle it to “On” mode to get the barcode scanner started; toggle it to “Off ”
mode to turn off the barcode scanner.
Scanning Trigger：
1. Short press the trigger and a beam of red light emits, and the barcode scanner is ready to
scan barcodes.
2. Double-press the trigger to upload the buffer data.
3. Press and hold the trigger for 1 second to pop up/hide the virtual keyboard (This function is
only available when the barcode scanner is connected to an iOS device in Bluetooth HID
mode, please check Chapter 2.2). Press and hold the trigger for 5 seconds to enter the
Bluetooth pairing state (This function is only available when the Bluetooth is disconnected in
Bluetooth HID mode).
Product Specification
PHYSICAL C
Length*Width*Height = 92mm*69mm*162mm
Weight 197g
Color Dark Grey + Black + Yellow
Indication
Buzzer，LED indicator
Interface USB
Voltage DC 5V
Battery Capacity 2600mAh
To Next Page
Loading...
