Need help?Do you have a question about the Inateck SA02003 and is the answer not in the manual?
General| Brand | Inateck |
|---|---|
| Model | SA02003 |
| Category | Docking Station |
| Material | Aluminum Alloy |
| Ports | 1x HDMI, 1x Ethernet, 1x SD/TF card reader, 1x 3.5mm audio |
| Compatibility | Windows, macOS, Chrome OS, Linux |
Ensure drives are not accessed before removal; avoid swapping drives during operation to prevent data loss.
The dock enters sleep mode after 30 minutes of inactivity; drive access wakes it up.
Disk B capacity must be equal or larger than Disk A's actual usable capacity for successful cloning.
Flashing stops during duplication may indicate bad sectors on the disk.
Rest capacity of Disk B is managed via 'Computer Management'.
Windows XP supports up to 2TB; newer OS/GPT partitions needed for larger drives.
Ensure target drive data is disposable as cloning overwrites all data and partition methods.
Avoid removing/inserting drives while the other is accessed to prevent damage and data loss.
To Next Page
