22
Question Answer
•
My touchscreen
is inaccurate or not
responsive.
•
Calibrate the touchscreen under Settings of the Administrator Menu
‘23. Touchscreen Alignment’.
*
Press rmly to optimize touchscreen response.
•
If you cannot enter the Administrator Menu due to touchscreen problems,
please restart the InBody. The InBody stores the last touchscreen alignment
and will automatically recall the previous touchscreen settings. The InBody
can also recognize if its touchscreen alignment is off screen and will
automatically take the user to the calibration screen after restarting.
•
I would like to connect
other equipment to the
InBody270.
•
Please refer to ‘E. Connecting Printer, Thermal Printer, Stadiometer, Blood
Pressure Monitor, Barcode Reader and SD400’ in section ‘I. InBody270
Installation’ in this User’s Manual.
270_manual_ENG_B_150608.indd 22 2015. 6. 8. 18:45
To Next Page
