Important helpful information for operating InBody J10.
1. This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference
to other devices in the vicinity. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
other devices, which can be determined by turning the equipment off and on the user is
encouraged to try to correct the interference by one or more of the following easures:
- Reorient or relocate the receiving device.
- Increase the separation between the equipment.
- Connect the equipment into an outlet on a circuit different from that to which the
other device(s) are connected.
- Consult the manufacturer or field service technician for help.
2. This product has been designed, manufactured, and inspected under the full quality
assurance system of Biospace. Biospace fulfills the international standardization
system, ISO 9001:2000 and ISO 13485:2003.
3. InBody J10 fulfills the Standards of IEC60601-1 (EN60601-1), Safety of Electric
Medical Equipment. In addition, InBody J10 complies not only with the Level A for Noise
Immunity but also with Level A for Noise Emission by the Standard IEC60601-1-2
(EN60601-1-2), Electromagnetic Compatibility requirements.
To Next Page
Loading...
Need help?
General
