A. Region
Set the date, time, display mode, unit, ethnic background and language.
(1) Set Date
Set date, using (
) button. Users can move to each section for year or month or
date with pushing (
) button.
(2) Set Time
Type the set time, using (
) button. Users can move to each section for hour or
minute or second with pushing (
) button.
(3) Display Mode
Select the date display mode. ‘yy’ is for year, ‘mm’ is for month and ‘dd’ is for date
(yy/mm/dd, mm/dd/yy, dd/mm/yy).
(4) Unit
Select units to be used(kg/cm, kg/in., lb./cm, lb./in.).
(5) Ethnic Background
Select the ethnic background of the examinee(Asian, Caucasian, African, Hispanic,
Others).
(6) Language
Select the language to be used.
B. Printer
(1) Printer
Select the type of printer. Printers that support PCL and SPL are compatible with the
InBody J10.
(PCL Compatible Printer, SPL Compatible Printer, SPL 2009 Printer)
(2) Alignment
It is possible to adjust the coordinates on the result sheet. Use upper, lower buttons to
adjust it for the desired location. Use left, right buttons to move between X and Y axis.
The new adjustment can be previewed by ‘Test Print’.
*The adjustment range - Result sheet for child: X(left, right), Y(upper, lower) +50~-50
Result sheet for adult: X(upper, lower), Y(left, right) +50~-50
After adjustment, you can check whether the alignment has done properly by ‘test print’.
Chapter 3 Setup Establishment
3-2
2. Setup menu
To Next Page
Loading...
Need help?
General
