INCOE I Series User Manual

INCOE
®
I Series IC-15A Temperature Control Module
Quick Start Manual
Page 4 of 5 12/02/2013
INCOE
®
Corp. Global Headquarters 1740 E. Maple Road Troy, Mi 48083 USA T: 248-616-0220 E: tech.support@incoe.com www.incoe.com
MENUS
Settings Menu
Setting Description Button Range
AL-H
High Limit Temperature
Alarm
▲ / ▼
0 - 99
AL-L
Low Limit Temperature
Alarm
▲ / ▼
0 - -99
Stby
t
Standby Time
▲ / ▼
Hour: 0 - 9
Min: 0 - 59
SET
Convert between
hour and minute
Stby
P
Standby Temperature %
▲ / ▼
0 - 99%
Lock Cong. Menu Lock
SET On / Off
-ID- Channel ID
▲ / ▼
0 - 63
-bz- Buzzer / Alarm
SET
On / Off
Conguration Menu
Setting Description Button Range
UnIt Temperature Unit Display
SET
1.0 or 0.1
C--F Temperature Scale
SET
°F (FdSP)
°C (CdSP)
-In- Thermocouple Type
SET
J (IC-J)
K (CA-K)
SOFt - t Soft Start Time
▲ / ▼
0 - 30 min.
HC-H High Limit Current Alarm
▲ / ▼
0 - 20.0 A
HC-L Low Limit Current Alarm
▲ / ▼
0 - 20.0 A
-Er- Error Code Saving Function
▲ / ▼
Search 1-20
HSCI Power Output Method
SET
PWM (PuN)
SSR (SSr)
tUnE Auto Tuning On / Off
SET
On / Off
boSt - t Boost Time
▲ / ▼
0 - 99 min.
boSt - P Boost Power %
▲ / ▼
0 - 99.9%
SOFt - P Soft Start Power %
▲ / ▼
0 - 99.9%
ΠPId NPID On / Off
SET
On / Off
IdLE * Idle Feature On / Off *
SET
On / Off
For safety, it is recommended that the Idle Feature remain in the ON position
When an error occurs (e.g., Open TC, short), the module can send a signal
to the PC Enclosure to sound a buzzer or alarm. Standard INCOE
®
PC Enclosures are not equipped with a buzzer or alarm. This feature must
be added separately, if necessary.
**
*

INCOE I Series Specifications

General

Brand	INCOE
Model	I Series
Category	Control Unit
Language	English