MP30D: INSTALLATION & OPERATION MANUAL
PAGE 9
BLUETOOTH
Use the ‘Mode’ button to select Bluetooth.
Press and hold the button to enter pairing mode. With a compatible Bluetooth device paired,
pressing the button will play or pause the audio. Pressing the button will begin the track again
or skip to the previous track and pressing the button will skip to the next track.
USB
Use the ‘Mode’ button to select USB.
Insert a USB drive into the port on the front of the unit. The unit will automatically locate compatible audio
les on the USB drive and begin playback.
Use the button will play or pause the audio. Pressing the and buttons will skip to the previous
or next track respectively.
Pressing the button will rotate between Loop All, Loop One and Random playback modes.
To Next Page
Loading...