Indesit DFO 3T133 A F X User Manual (English)

To Next Page

ENQuick Guide

THANK YOU FOR BUYING AN INDESIT PRODUCT.

In order to receive a more complete assistance, please

CONTROL PANEL

FIRST TIME USE

1. On-O / Reset button with

indicator light

2. Program selection button with

indicator light

3. Multizone button with indicator

light / Tablet (Tab)

4. Eco program indicator light

5. Display

6. Program number and remaining

time indicator

Program Programs description

Drying

phase

NaturalDry

Available

options

Duration

of wash

program

(h:min)

**)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

Eco 50°- Program is suitable to clean normally soiled tableware, that for

this use, it is the most ecient programme in terms of its combined ener-

gy and water consumption, and that it is used to assess compliance with

the EU Ecodesign legislation.

3:10 9.5 0.83

Auto Intensive 65°- Automatic program for heavily soiled dishes and

pans (not to be used for delicate items).

2:00 - 3:10 14.0 - 17.0 1.50 - 1.85

Auto Mixed 55° - Automatic program for normally soiled pans and dishes.

1:30 - 2:30 14.5 - 16.0 1.15 - 1.30

Glass 45° - Program for delicate items, which are more sensitive to high

temperatures, for example glasses and cups.

1:40 11.5 1.20

Fast&Clean 28’ 45° - Program to be used for half load of lightly-soiled

dishes with no dried food residues. Without drying.

0:28 9.0 0.50

Extra Hygiene 65° - Normally or heavily soiled crockery, with additional an-

tibacterial wash. Can be used to perform maintenance of the dishwasher.

1:40 10.0 1.30

Extra 50° - Program that allows to wash very big items loaded in the

lower rack. Please apply detergent directly to tub instead of detergent

dispenser. Upper rack should be removed with this cycle.

1:00 11.0 1.20

Prewash - Use to refresh crockery planned to be washed later. No deter-

gent to be used with this program.

0:12 4.5 0.01

Push&GO 50° - Everyday wash and dry cycle that ensures great cleaning

performance in a short time without the need to pre-treat dishes.

1:25 11.5 1.10

PROGRAMS TABLE

Before using the appliance carefully read the Safety Instruction.

PLEASE SCAN THE QR CODE ON YOUR

APPLIANCE IN ORDER TO HAVE MORE

DETAILED INFORMATION

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine’s functional components.

• It is mandatory that the salt reservoir never be empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be

lled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Position the funnel (see gure) and ll the salt reservoir

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

3. Only the rst time you do this: ll the salt reservoir

with water.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water

softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the proce-

dure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse

aid dispenser A should be lled when the RINSE

AID REFILL indicator light in the control

panel is lit.

NEVER pour the rinse aid directly into the appliance

tub.

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device C. Introduce the

detergent into the dry dispenser D only. Place the amount of detergent for

pre-washing directly inside the tub.

If all-in-one detergents are used, we recommend using the TABLET button,

because it adjusts the program so that the best washing and drying results

are always achieved.

Usage of detergent not designed for dishwashers may cause

malfunction or damage to the appliance.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently pre-

venting scale buildup on heater, contributing also to better cleaning e-

ciency. This system regenerates itself with salt, therefore it is required

to rell salt container when empty.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per 6 Eco cycles with water hardness level set to 3.

Regeneration process starts in nal rinse and nishes in drying phase, be-

fore cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

965 7 8 1210 11 13

7. Tablet (Tab) indicator light

8. Closed water tap indicator light

9. Rinse Aid rell indicator light

10. Salt rell indicator light

11. Push&GO button with

indicator light

12. Delay button with indicator light

13. Start/Pause button with

indicator light / Drain out

Other manuals for Indesit DFO 3T133 A F X

Daily Reference Guide88 pages

Need help?

Do you have a question about the Indesit DFO 3T133 A F X and is the answer not in the manual?

Indesit DFO 3T133 A F X Specifications

General

Current	10 A
Connected load	1900 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (off)	0.5 W
Power consumption (left-on)	6 W
Water consumption per cycle	9.5 L
Energy consumption per cycle	0.833 kWh
Extra dry	Yes
Cycle time	190 min
Noise level	43 dB
AquaStop function	-
Dishwashing programs	Cups 40°C, Eco 50°C, Hygiene, Intensive 65°C, Pre-wash, Quick
Left-on mode duration	12 min
Number of place settings	14 place settings
Number of washing programs	6
Number of temperature settings	4
Door color	Stainless steel
Cord length	1.3 m
Control type	Buttons
Product size	Full size (60 cm)
Inlet hose length	1.55 m
Outlet hose length	1.5 m
Appliance placement	Freestanding
Control panel color	Black
Wi-Fi controlled	No
Package weight	49000 g