EasyManua.ls Logo

Indesit DIC3C24A - User Manual

Indesit DIC3C24A
8 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EN
1
DAILY REFERENCE
GUIDE
Before using the appliance carefully read Safety Instructions.
PRODUCT DESCRIPTION
THANK YOU FOR BUYING A INDESIT PRODUCT.
In order to receive a more complete assistance, please
register your appliance on: www.indesit.com/register
You can download the Safety Instructions and the
User Manual, by visiting our website docs.indesit.eu
and following the Instructions on the back of this
booklet.
APPLIANCE
1. Upper rack
2. Foldable aps
3. Upper rack height adjuster
4. Upper spray arm
5. Lower rack
6. Cutlery basket
7. Lower spray arm
8. Filter Assembly
9. Salt reservoir
10. Detergent and Rinse Aid dispensers
11. Rating plate
12. Control panel
CONTROL PANEL
0000 000 00000
Service:
1
2
3
4
5
6
10
12
7
11
9
8
1. On-O/Reset button with indicator light
2. Program selection button
3. Salt rell indicator light
4. Rinse Aid rell indicator light
5. Program number and delay time indicator
6. Tablet (Tab) indicator light
7. Display
8. Push&GO button
9. Delay button
10. START/Pause button with indicator light / Tablet (Tab)
1 2 3
4
5 6 7
8 9 10
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Indesit DIC3C24A
o cerca il tuo prodotto tra le migliori offerte di Lavastoviglie

Table of Contents

Questions and Answers

  • J
    Joan FitzpatrickAug 13, 2025
    Why won't my Indesit DIC3C24A Dishwasher start or respond to commands?
    • A
      Anthony MartinAug 13, 2025
      Your Indesit Dishwasher might not start or respond to commands for several reasons: * It may not be plugged in properly, so ensure the plug is fully inserted into the socket. * There may have been a power outage. If so, open the dishwasher door, press the Start button, and close the door within 4 seconds. * The dishwasher door might not be closed properly. Push the door vigorously until you hear a click. * If the door was opened for more than 4 seconds during a cycle, press START/Pause and close the door within 4 seconds. * If the display shows 9 or 12 and the On/Off LED is blinking rapidly, switch the appliance off and then back on after a minute. Restart the program. If the issue continues, unplug the appliance for 1 minute, then plug it back in.
  • C
    cortezchristineAug 17, 2025
    What to do if my Indesit DIC3C24A Dishwasher won’t drain and shows 3 with a blinking On/Off LED?
    • F
      flynnebonyAug 17, 2025
      If your Indesit Dishwasher isn’t draining and the display shows 3 with a rapidly blinking On/Off LED, here’s what to check: * Wait until the wash cycle finishes, as it may not be complete yet. * Inspect the drain hose to ensure it is not bent. * Make sure the sink drain pipe is not blocked; clean it if necessary. * Clean the filter if it’s clogged with food residues.
  • J
    Jeffrey WhiteAug 20, 2025
    Why is my Indesit DIC3C24A Dishwasher not filling with water and showing H 6 with a blinking On/Off LED?
    • S
      Stephanie WillisAug 20, 2025
      If your Indesit Dishwasher isn't filling with water and shows 'H 6' with a blinking On/Off LED, check the following: * Ensure there is water in the water supply and that the tap is fully open. * Check that the inlet hose is not bent. * Inspect the sieve in the water inlet hose for clogs and clean it if necessary. After checking and cleaning, turn the dishwasher off and on, then restart a new program.
  • H
    hartmanjasonAug 25, 2025
    Why is my Indesit DIC3C24A finishing the cycle prematurely, displaying 15 and a blinking On/Off LED?
    • K
      Kevin JonesAug 25, 2025
      If your Indesit Dishwasher is ending cycles early, showing '15' and a blinking On/Off LED, consider these potential causes: * The drain hose might be positioned too low, or siphoning into the home sewage system. Check that the end of the drain hose is at the correct height. Also, inspect for siphoning and install an air admittance valve if needed. * There may be air in the water supply. Check the water supply for leaks or other issues that could introduce air.
  • T
    Tonya NelsonAug 28, 2025
    Why are the dishes not clean after using my Indesit Dishwasher?
    • D
      Danielle RodriguezAug 28, 2025
      If your dishes aren't clean after a cycle in your Indesit Dishwasher, consider the following: * Ensure the crockery is arranged correctly so water can reach all surfaces. * Check that the spray arms can rotate freely without being blocked by dishes. * Select a more appropriate wash cycle if the current one is too gentle. * Avoid excessive foam by measuring detergent correctly or using a dishwasher-suitable detergent. * Make sure the rinse aid compartment cap is properly closed. * Clean the filter assembly if it’s soiled or clogged. * Fill the salt reservoir if it’s empty.
  • L
    Leah RojasSep 1, 2025
    Why is the salt indicator lit on my Indesit Dishwasher?
    • T
      Trevor MartinSep 1, 2025
      The salt indicator on your Indesit Dishwasher might be lit because the salt reservoir is empty. Refill it with salt. Note that the indicator may remain lit for several wash cycles after refilling. Also, ensure you have adjusted the water hardness setting correctly.
  • A
    Amanda FrankSep 4, 2025
    How to fix excessive noise in my Indesit DIC3C24A?
    • R
      Richard ByrdSep 4, 2025
      Excessive noise in your Indesit Dishwasher could be due to: * Dishes rattling against each other. Make sure to position the crockery correctly. * Too much foam. This may be caused by using too much detergent or a detergent that is not suitable for dishwashers. Restart the current cycle without adding any detergent by switching the dishwasher off, then on again, selecting a new program, pressing START/Pause, and closing the door within 4 seconds.
  • D
    Danielle DelgadoSep 8, 2025
    What to do if the rinse aid indicator is lit on my Indesit DIC3C24A?
    • B
      Bob PetersSep 8, 2025
      If the rinse aid indicator is lit on your Indesit Dishwasher, it means the rinse aid dispenser is empty. Refill the dispenser with rinse aid. Note that the rinse aid indicator may remain lit for several wash cycles after refilling.

Indesit DIC3C24A Specifications

General IconGeneral
Appliance placementFreestanding
Control panel colourBlack
Noise level44 dB
Number of washing programs8
Drying systemStatic
Drying PerformanceA
Cleaning PerformanceA
Delayed start timerYes
Delay start (max)24 hours
Adjustable upper basket heightYes
Water fillCold
Energy efficiency classE
Energy consumption per 100 cycles95 kWh
Annual Energy Consumption266 kWh
Half Load OptionYes
Number of place settings14
Washing programsEco, Intensive
Water consumption per cycle9.5 L
Annual Water Consumption2660 L

Related product manuals