Why Indesit DPG 15B1 Dishwasher is not taking in water?
- PPatricia LeonSep 2, 2025
If your Indesit dishwasher isn't taking in water and you hear beeps with flashing lights, it could be due to a few reasons: Check that there is water in the mains supply by turning on the tap. Make sure the water inlet hose isn't bent. If the appliance stopped because no action was taken when the beep sounded, switch off the machine using the ON/OFF button, turn on the tap and switch the machine back on after a few seconds by pressing the same button. Then, reprogram the appliance and restart the wash cycle.











