To get full satisfaction from the hob, please read these instructions carefully and keep them for future consultation.
• To use the hob, turn the knob(s) clockwise and set it/them to the required power.
• To turn the hob off, turn the knob(s) back to position “0”.
• The hob is tted with residual heat indicators. These light up when the cooking
zones reach temperatures that could cause burns. These indicators remains
alight after the cooking zones are switched off, and turn off only when the zones
are no longer hot enough to be dangerous.
Important:
To avoid permanently damaging the glass-ceramic top,do not use:
- Pots with bottoms that are not perfectly at.
- Metal pots with enamelled bottom.
DIMENSIONS OF THE COOKTOP AND WORKTOP (mm)
Type PLEVS 230 V~/400 V 3 N~ 50 Hz 5.8 kW
Make sure that the voltage indicated on the rating plate is the same as the
mains voltage. Technical data is given on the rating plate on the edge of the
hob and also below:
ELECTRICAL CONNECTION
Supply voltage
Cables
(number and size)
230V ~ +
230V 3 ~ +
400V 3N ~ +
400V 2N~ +
3 x 2,5 mm
4 x 1,5 mm
5 x 1,5 mm
4 x 1,5 mm
HOB INSTRUCTIONRI 860 C
19515303500
2
5. Rear right cooking zone control knob
6. Rear left cooking zone control knob
7. Front left cooking zone control knob
8. Front right cooking zone control knob
1
3
4
1. Radiating cooking zone Ø 145
2. Radiating cooking zone Ø 180
3. Radiating cooking zone Ø 145
4. Radiating cooking zone Ø 180
5
6
7
8
To Next Page
Need help?
General