To Next PageTo Next Page
Need help?Do you have a question about the Indesit RI 861 X and is the answer not in the manual?
The Indesit RI 861 X is a ceramic hob designed for domestic cooking, offering a blend of functionality and user-friendly features. This appliance is intended solely for food preparation and should not be used for other purposes, such as heating a room. Its design prioritizes safety and ease of use, making it a suitable addition to any modern kitchen.
The hob features four radiating cooking zones, each controlled by a dedicated knob. Two zones have a diameter of 145 mm, and two have a diameter of 180 mm, providing flexibility for various pot and pan sizes. The control knobs are located on the front right of the hob, making them easily accessible during cooking. To activate a cooking zone, the user simply turns the corresponding knob clockwise to the desired power level. The power levels are adjustable, allowing for precise temperature control, from gentle simmering to rapid boiling. Once cooking is complete, the knob should be turned back to the "0" position to switch off the zone.
A key safety feature of the RI 861 X is the residual heat indicators. These indicators illuminate when a cooking zone reaches temperatures that could cause burns, even after the zone has been switched off. They remain lit until the surface has cooled down to a safe temperature, providing a visual warning to prevent accidental contact and potential injury. This feature enhances user safety, especially in busy kitchen environments.
The hob is designed to be integrated into a worktop, with specific dimensions required for proper installation. It is compatible with various worktop materials, including wood, marble, plastic, ceramic, and stone, though different fixing methods may be required depending on the material. The electrical connection must be carried out by a qualified technician in accordance with local regulations, ensuring proper earthing and adherence to safety standards. The appliance is designed to operate on a 230V or 400V supply, depending on the specific wiring configuration.
For optimal performance and energy efficiency, it is recommended to use pots and pans with flat bottoms that match or are slightly larger than the diameter of the cooking zones. Using pots with perfectly flat bottoms ensures maximum contact with the heating surface, leading to more efficient heat transfer and reduced cooking times. Metal pots with enamelled bottoms should be avoided to prevent potential damage to the glass-ceramic top.
Keeping pots covered during cooking is another recommended practice for energy saving, as it helps retain heat and speeds up the cooking process. When cooking vegetables or potatoes, using minimal water can also contribute to faster cooking times and energy conservation. For even greater efficiency, a pressure cooker can be utilized, significantly reducing both cooking time and energy consumption.
The hob is equipped with controls that are straightforward and intuitive. Each knob clearly corresponds to a specific cooking zone, minimizing confusion during operation. The smooth glass-ceramic surface is not only aesthetically pleasing but also practical for cooking, providing a stable and even heating platform.
Maintaining the RI 861 X is relatively simple, contributing to its longevity and aesthetic appeal. It is crucial to clean the hob after each use, once it has cooled down. This practice prevents the build-up of dirt and food spills, making subsequent cleaning easier and more effective. For general cleaning, a clean cloth, absorbent kitchen wipes, and washing-up liquid or a specialized glass-ceramic cleaner are recommended.
For more stubborn, baked-on dirt, a special scraper tool (if provided) along with specific cleaning products can be used. It is important to address any food spills promptly before they dry and harden, as this makes them more difficult to remove. Abrasive products, chlorine-based cleaners, oven-cleaner sprays, and pan scourers should be avoided, as they can scratch or damage the glass-ceramic surface.
To ensure the hob remains in excellent condition, it should be treated periodically with specific products designed for glass-ceramic surfaces, which are readily available in stores. This helps protect the surface and maintain its shine.
In some models, the control knobs may be telescopic, allowing them to be lifted approximately 1 cm for easier cleaning underneath. After cleaning, they should be restored to their original position.
The appliance is designed with durability in mind, but in the event of any issues, a troubleshooting guide is provided to help users identify and resolve common problems. For instance, if the hob does not work, users are advised to check the power supply, ensure the knobs are not at "0," and try turning the multi-pole switch off and on again. If the hob will not switch off, it should be immediately disconnected from the power supply. For more complex issues or repairs, contacting an authorized After Sales Service is recommended to ensure that original spare parts are used and repairs are carried out correctly, preserving the safety and quality of the product.
General| Number of Cooking Zones / Burners | 4 |
|---|---|
| Width | 60 cm |
| Power Levels | 9 |
| Material | Stainless Steel |
| Ignition Type | Automatic |
| Type | Gas |
| Burner Types | Rapid, Semi-rapid, Auxiliary |
| Gas Supply | Natural Gas / LPG |
| Dimensions (WxD) | 590 x 510 mm |
