6-4
Indmar Marine Engines
ENGINE OIL
Checking Oil
Figure 6.1 – Engine Oil Dipstick Location
Check the oil level with the dipstick every time you get
fuel. To get an accurate reading, your engine should be
warm and the boat should be level. For best results wait
about 2 minutes after you turn off the engine to allow the
oil to drain into the oil pan, giving you a more accurate
reading.
Figure 6.2 – Dipstick
1. Pull dipstick from engine.
2. Wipe oil off stick with clean towel/cloth.
3. Insert dipstick completely into the dipstick tube.
4. Remove dipstick and read oil level.
5. After reading is complete, return dipstick to tube.
6. Add oil if necessary.
Adding Oil
If oil level on the dipstick reads below the ADD mark,
add only enough oil to return level to FULL mark.
Figure 6.3 – Engine Oil Fill
INDM-A025
ADD
OPERATING RANGE
SEE OWNERS MANUA
INDM-A003
INDM-B001
OME0502-07 Body.qxd 6/14/06 10:38 AM Page 6-4
To Next Page
Loading...
Need help?
General