To avoid misuse, all discarded electrical devices must be disposed of safely and
There is a small area at the bottom center of the wok/pan that heats slowly. To ensure
that oil is evenly heated, stir the oil in the wok/pan.
The glass-ceramic panel, enclosure, wok/pan, tub, pot and pot support of the induction
cooker are outside the warranty scope.
An all-pole disconnection switch having a contact separation of at least 3mm in all
poles should be connected in fixed wiring.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Equipment for use in trades, professions, and which is not intended for sale to the
1.4 Unauthorized Change and Part Replacement
Do not make any change to the induction cooker. If the induction cooker needs to be
changed, please contact the manufacturer. For safety’s sake, please use parts and
components certified by the manufacturer. Use of any uncertified parts and components will
void all the commitments and warranties of the manufacturer.
To Next Page
Loading...