3
Vortex Operating Manual
DISCONNECT POWER before moving or servicing the INFICON
Vortex.
This unit should be opened only by a technically qualified person
who has been trained in basic electronics and refrigeration. The risk of
ELECTRIC SHOCK and exposure to HOT compressor parts is possible if
the unit is opened.
TO REDUCE THE RISK OF FIRE, EXTENSION CORDS SHOULD
NOT BE USED with this equipment as the wiring can overheat under
conditions of high current draw. If an extension cord is absolutely
necessary, its length should be as short as possible and it should
contain size 16 AWG or larger wiring.
FLAMMABLE ENVIRONMENTS ARE DANGEROUS when any
machine is used because motors and switches can generate sparks.
This equipment should be used in locations with mechanical ventilation
providing at least four air changes per hour, or the equipment should be
located at least 18” above the floor. DO NOT USE THIS EQUIPMENT IN
THE VICINITY OF SPILLED OR OPEN CONTAINERS OF GASOLINE OR
ANY OTHER FLAMMABLE LIQUID.
2.0 Specifications, Features and Warranty
2.1 Vortex Specifications
Refrigerants . . . . . . . . . . R-12, R-134A, R-401C, R-500, R-401A, R-409A,
R-401B, R-22, R-502, R-407C, R-402B, R-408A,
R-407A, R-404A, R-402A, R-507, R-407B, R410A
Power . . . . . . . . . . . . . . . 230 V(ac), 50/60 Hz, 4A
Compressor:. . . . . . . . . . 1/3 HP Oilless, No inlet valve, DC Motor Drive
Cooling: . . . . . . . . . . . . . Fan driven off DC compressor motor
Protection: . . . . . . . . . . . High Pressure Switch Cutoff at 3789 kPa
Compressor motor thermally protected
Pressure . . . . . . . . . . . . . Low side design pressure 3500 kPa
High side design pressure 5500 kPa
Temperature . . . . . . . . . . Operating Range 10 to 40 °C
Case . . . . . . . . . . . . . . . . Blow-Molded, High Impact Strength
Size . . . . . . . . . . . . . . . . . 457.2 mm x 241.3 mm x 368.3 mm
Weight. . . . . . . . . . . . . . . 11.79 kg
To Next Page
Loading...