3. Adjust the timer setting by touch the “-” or “+”
controls. The minute minder indicator will start
flashing and will show in the timer display.
Hint: Touch the “-” or “+” control of the timer
once to decrease or increase by 1 minute.
Touch and hold the “-” or “+” control of the timer to decrease or
increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minute.
4. Touch the ‘Timer’, the timer is cancelled, and the “--” will show in the minute
display.
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
6. Buzzer will beep for 30 seconds and the timer
indicator shows “- - “ when the setting time
finished.
Setting the timer to turn one cooking zone off
1. Touching the heating zone selection control
that you want to set the timer for. (e.g. zone 2#)
To Next Page
Loading...
