EasyManua.ls Logo

Infiniton SD-3M - Installation; Product Description

Infiniton SD-3M
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Top Board
Control Panel
Door
Cabinet
10cm
7 8
less than 10cm distance from the wall. It is suggested
there are no obstacles within 1.5m in front of dryer and
keep ventilated.
Dryer should be placed in a ventilated area with not
the dryer will work unbalanced or stop working sometimes.
if dryer could not be placed horizontally (the lean angle is no more than 2°,
Notice when installing:
Do not install the dryer in the open air or place easily damaged by rain;
Do not place the back of dryer near curtain or something in the wind;
Do not place the dryer near gas or flammable area.
• Connect one end of flex tube with whorl to the back vent, then fix it deasilly till tight.
The other end of flex tube will be extended to outdoor, please refer the right
assemble way to the below pictures.
Flex tube fixing:
Note!
INSTALLATION INSTALLATION
Product Description
Installation
Level Adjusting
Once in its permanent operating position,
check that the dryer is absolutely level with the aid
of a spirit level. If it is not, adjust the feet with a tool.
Note: Please see the products you purchased in kind prevail.

Other manuals for Infiniton SD-3M

Related product manuals