890 HD USERS INSTRUCTIONS
Flame height adjustment
Once the fire has been started (after a period of 10 minutes) the flame height can be decreased by
moving your finger clockwise or decreased moving your finger anti-clockwise using the selector wheel.
Once the desired flame level is set, remove your finger from the selector wheel to transmit your selection to
the receiver. Six flame levels are selectable. Press whilst the display is active to display the current flame
level.
Turn off (shut down)
To turn the appliance off, press and hold down until the progress bar has completed. If the is
released before the progress bar has completed the operation will cancel.
Mode select
With the fire running on manual operation you can access three further “modes”. Press for “mode”. Use
the selection wheel to cycle through the three options, “Auto”, “Sleep” and “Light”. Press to select
“Auto” or “Sleep”
Sleep:- Use the selector wheel to choose from the available time range of 5 minutes to 1 hour 30 minutes.
Once the desired countdown time has expired the appliance will turn off. By pressing the button during
the countdown will cancel the countdown timer if required.
Light:- Use the selector wheel and scroll to the “light” option. An appliance back light can be turned on or
off by pressing the button.
To Next Page
Loading...