To Next PageTo Next Page
Need help?Do you have a question about the Infinity 890 HDBF and is the answer not in the manual?
Basic overview and purpose of the user manual.
Information regarding product safety, materials, and statutory rights.
General notes and safety advice for appliance users.
Instructions for operating the fire, including startup and basic controls.
Overview of the handset display screen and its functions.
Procedure for starting the appliance using the handset controls.
Guidance on using the thermostatic mode for temperature regulation.
How to activate the thermostatic control mode.
Setting the desired room temperature for thermostatic operation.
Procedure to exit thermostatic control and return to manual.
Accessing and using the handset's menu options.
Setting the 24-hour clock on the handset.
Changing temperature display units between Celsius and Fahrenheit.
Managing the handset pairing code or channel.
Restoring handset settings to original factory defaults.
Instructions for replacing the batteries in the remote handset.
Procedure for cleaning the appliance before and during installation.
Instructions for cleaning the appliance's glass front panel.
Cleaning procedure for the pilot light assembly area.
Guidance on cleaning the ceramic fuel bed components.
Correct positioning of logs and embers for optimal flame appearance.
Key technical data, dimensions, and performance metrics of the appliance.
Guidelines and requirements for selecting the correct installation location.
Key regulations, warnings, and standards for appliance installation.
Essential general requirements and minimum clearance specifications for installation.
Specifications for the required dimensions of the builder's opening.
Critical instruction to remove transit bolts before firebox installation.
Detailed steps for installing the appliance into a cavity wall.
Introduction to the different methods for installing the appliance.
Details for installing the appliance using slips or plaster edge finish.
Instructions for installing the appliance within a rebated fireplace surround.
Guidance for installing the appliance using the Zero Clearance Kit.
Procedure for connecting the gas supply line to the appliance.
Guidance on routing the power cable for the appliance.
Instructions for connecting the flue pipe and terminal.
Final checks and procedures to ensure the appliance is correctly commissioned.
Procedure for testing gas soundness and checking operating pressure.
Steps for correctly fitting the glass panel to the appliance.
Information and demonstrations to be provided to the end-user by the installer.
Requirements for regular annual servicing to maintain safety and performance.
Guidelines for annual servicing by a Gas Safe registered engineer.
Step-by-step guide for diagnosing pilot ignition failures.
Diagnostic steps for issues where the appliance fails to produce a spark.
Steps to diagnose why the pilot flame or main fire goes out.
Procedure for replacing the main gas control valve assembly.
Steps for replacing the appliance's gas injector.
Procedure for replacing the thermocouple safety device.
Instructions for replacing the pilot injector component.
Procedure for replacing the Electronic Data Board unit.
Instructions for replacing the expansion relief flap gaskets.
Guidance on replacing the remote control handset.
Procedure for pairing a new replacement handset with the appliance.
Details and conditions for the extended five-year parts warranty.
Detailed conditions and exclusions for the extended warranty.
Key details to record for warranty claims and support.
Section for recording annual service history to support warranty claims.
Checklist items related to the installation site and flue terminal.
Checklist items for hearth construction and dimensions.
Checklist items for gas supply connection and testing.
Checklist for overall installation compliance and customer demonstration.
General