Infinity 890 HDBF - Method A: Hole in the wall with non-combustible slips

P a g e | 19
Issue No 2
890 HD BF INSTALLATION INSTRUCTIONS
A-Hole in the wall with non-combustible slips or heat resistant plaster edge finish.
Please note:- We recommend the use of heat resistant board and finishing plaster directly around the edge
of the slip plate assembly. This will reduce the risk of cracking of the plaster finish around the appliance but
will not remove the chance of settle cracks appearing over a period of time.
Attach the slip plate assembly to the firebox using 4 off screws
provided.
Using “rawl” plugs and screws retain the firebox via the 6mm holes within the slip plate.