890 HD BF USERS INSTRUCTIONS
Lighting the Appliance & General Operation of Control
Display overview
Press to awaken the handset from its dormant sleep mode at any time. Fig 1 shows the display neutral,
ready to turn on.
Turn on (start up).
Pressing and holding displays an “UNLOCK” graphic Fig 2 prompting the button to be pressed
simultaneously. Whilst both & are pressed a progress bar Fig 3 will complete. If either button is
released before the progress bar has completed the operation will cancel. Once the progress bar has
completed the handset will display the status of the fire (priming – ignition – pilot – main burner) finishing at
the fire “on” display screen Fig 4
To Next Page
Loading...