Volume
If your receiver has sub-
woofer output jacks, you
may connect the Alpha
Junior Sub using this
method.
Note: Some receivers/
amplifiers have a single
(mono) subwoofer output. In
this case, it is recommended
that you use a “Y”-connector
(not included) to maximize
the subwoofer’s perfor-
mance.
Crossover Frequency
The crossover frequency
knob determines the high-
est frequency your sub-
woofer will reproduce. It
allows a seamless transition
from the subwoofer to the
satellite speakers. Experi-
ment with this adjustment
to find the crossover fre-
quency that sounds best in
your room.
For subwoofers used with
Surround Sound processors
with dedicated subwoofer
outputs, the best result will
be obtained with the control
at the ”130 Hz“ position.
To Next Page
Loading...
