Need help?Do you have a question about the Infinity II and is the answer not in the manual?
General| Model | Infinity II |
|---|---|
| Type | Home Theater System |
| Remote Control | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| Speaker Configuration | 5.1 |
| Subwoofer | Yes |
| Optical Input | Yes |
| Coaxial Input | Yes |
Provides essential safety information to prevent electric shock, fire, and injury when using the apparatus.
Instructions on how to use the manual and save it for future reference.
Overview of the innovative technologies used in the Modulus II system.
Details Infinity's patented CMMD transducer technology for improved speaker performance.
Explains the proprietary Room Adaptive Bass Optimization System (R.A.B.O.S.) for room calibration.
Lists and illustrates all components included in the Modulus II Home Theater System package.
Provides visual guides and text for optimal placement of satellite and center channel speakers.
Discusses critical factors for subwoofer installation and achieving a balanced bass response.
Step-by-step guide for placing satellite speakers on shelves using the provided base.
Detailed steps and considerations for securely mounting satellite speakers on a wall.
Emphasizes turning off power and using appropriate speaker wire for connections.
Explains correct positive and negative terminal connections for satellites and center channel.
Identifies and describes the functions of the controls on the subwoofer's rear and front panels.
Offers recommendations for optimal use and safety, including volume adjustments.
Illustrates how to connect the subwoofer to a receiver/processor with an LFE output.
Shows how to connect the subwoofer to a receiver/processor using left and right channel outputs.
Guides users on setting receiver modes and managing subwoofer power states.
Details how to set subwoofer level, phase, and final positioning for optimal sound.
Lists R.A.B.O.S. kit components and explains its purpose in room calibration.
Outlines necessary preparations before starting R.A.B.O.S. measurements and tests.
Lists all tracks on the R.A.B.O.S. Test CD, including tones for diagnostics and calibration.
Describes the RSLM's features, indicators, and placement for accurate measurements.
Guides setting the system and subwoofer playback levels using the RSLM for accurate testing.
Instructions on how to conduct low-frequency measurements using the Measurement Template.
Explains how to plot frequency response readings onto the R.A.B.O.S. measurement template.
Explains the functions of Frequency, Level, and Bandwidth parameters in parametric equalizers.
Details how to enter Frequency, Level, and Width settings onto the template.
Guides using the Width Selector to match the response peak on the Measurement Template.
Provides a strategy for correcting a single prominent peak in the frequency response.
Introduces examples of common response irregularities and correction strategies.
Offers guidance for handling situations with two prominent response peaks.
Explains how to address peaks near dips, recommending physical adjustment over EQ.
Details how to adjust for a very narrow, high peak in the frequency response.
Provides steps for dealing with response dips, suggesting physical movement over EQ.
Explains how to use the Freq, Width, and Level controls based on measurement results.
Guides the final adjustment of subwoofer gain for an optimal system balance.
Provides instructions for cleaning, inspecting wiring, and troubleshooting the system.
Lists technical specifications for the satellite and center channel speakers.
Details the technical specifications for the powered subwoofer.
To Next Page