Need help?Do you have a question about the Infinity BETA SW-10 and is the answer not in the manual?
General| Type | Powered subwoofer |
|---|---|
| Enclosure Type | Bass Reflex |
| Driver Size | 10 inches |
| Frequency Response | 28Hz - 150Hz |
| Amplifier Power | 150 Watts RMS |
| Crossover Frequency | 50Hz - 150Hz |
| Inputs | Line level, Speaker level |
Covers basic operation, electrical safety, component handling, and warnings.
Advises on product placement, ventilation, water avoidance, and accessory usage.
Details cleaning, unplugging for non-use, and lightning protection.
Instructions for unpacking the subwoofer and advice on initial placement strategy.
Identifies and describes the controls and connection terminals located on the rear panel.
Details how to connect the subwoofer using LFE or high-level inputs.
Illustrates the correct process for connecting speaker wires to the terminals.
Guides powering on, setting gain, phase, and crossover frequency for optimal performance.
Provides instructions for cleaning the enclosure and general servicing recommendations.
To Next Page
