Infinity INFMR-180 - General Controls (In Detail); Basic Operation Controls; Audio Adjustments (Bass, Treble, Balance, Fader, EQ)

General Controls (In Detail)
{\)Infinity
II
sA~o
II
1.
POWER
ON/OFF
button
(1)
Simply
press the Power button (1) to
tum
the unit on and off.
2.
SELECT
button (2)
2-1
Audio control
(VOLUME
I
BASS
I
TREBLE
I
BALANCE
I
FADER)
Press
SEL
button (2) repeatedly to select the desired mode in the following order:
BASS
-->TREBLE
-->BALANCE -->FADER-->
EQ
At
each feature,
tum
VOL
knob (2) to adjust to the desired level.
If
the key
or
one
of
the
keys is not pressed within 5 seconds, the radio automatically switches into volume
control mode.
Please note that
if
an
EQ
setting is chosen, then you will not be able to access
BASS
and
TREBLE functions. This is because the stereo has pre-chosen those levels for you.
You
may
adjust
BASS
and TREBLE
if
EQ is in the
OFF
position.
a.
BASS Control
To
adjust the
bass
tone level, first select the bass mode
by
pressing button (2) until
BASS
appears
on
the display panel.
Tum
VOL
knob (2) within 5 seconds to adjust the bass level
as desired. The bass level will
be
shown
on
the display panel from a minimum
of
BASS -7
to a maximum
of
BASS
+7.
b.
TREBLE
Control
To
adjust the treble tone level, first select the
tre_bie
mode
by
pressing button (2) until
TREBLE appears
on
the display panel.
Tum
VOL
knob (2) within 5 seconds to adjust
the treble level as desired. The treble level will be shown
on
the display panel from a
minimum
of
TREBLE -7 to a maximum
of
TREBLE
+
7.
c.
BALANCE Control
To
adjust the left-right speaker balance, first select the balance mode
by
pressing button
(2) until
BALANCE appears
on
the display panel. Turn
VOL
knob (2) within 5 seconds
to adjust the left-rear speaker level as desired. The balance position will
be
shown
by
the
bars
on
the display panel from
BALANCE
LlO (full left) to
BALANCE
RIO
(full right).
7