Disc Operation
~Q~~
1.
Loading a CD
Open the door
by
pushing the Faceplate Release button (6).
Insert a CD label side up into the slot opening, push the front panel backward to the
front plate. A noticeable "click" sound will be heard, resulting in a properly closed unit.
The CD will begin playing automatically after it is loaded.
Notes:
-NEVER
insert foreign objects into the CD slot opening.
-
If
a CD is difficult to insert, there may already be a CD loaded in the unit.
-
If
the unit has become extremely hot we strongly recommend that you allow it to
cool down before using.
- Take care
of
your CDs to preserve the quality
of
the recording. Do not allow them
to be exposed to direct sunlight. Store them in a place protected from dirt and dust
and avoid handling them with oily, greasy or wet hands.
CD eject button CD slot
Front panel
Connector pin
2. With a disc inside, simply select the CD
by
pressing the MODE button (3)in sequence.
3. Play I Pause (8)
Push this button to Pause playback. Push it again to resume playback.
3. lntro Scan button (9)
Short push SCAN to hear the first 10 seconds
of
each track in the disc. Press and hold
SCAN for 2 seconds to hear the first 10 seconds
of
each track in current directory. Simply
push SCAN again to return to normal play mode.
Note: The press and hold function is only available for
MP3/WMA
playing mode.
11
To Next Page
Loading...
