Need help?Do you have a question about the Infinity Interlude IL60 and is the answer not in the manual?
General| Type | Floorstanding Speaker |
|---|---|
| Sensitivity | 90dB |
| Nominal Impedance | 8 Ohms |
| Midrange | 5" |
| Tweeter | 1" |
| Crossover Frequencies | 300Hz |
Instructions for safe operation, cleaning, placement, and general handling.
Covers power sources, grounding, lightning, servicing, and damage prevention for user safety.
Introduction to the product line and its key technologies.
Steps for unpacking speakers and attaching the feet for setup.
Recommendations for positioning speakers in a stereo setup for optimal sound.
Guidance on placing speakers for a home theater system configuration.
Overview of controls and connectors on the rear and front panels of the speaker.
Connecting to a 2-channel receiver/integrated amplifier without subwoofer output.
Connecting to a 2-channel receiver with preamp outputs and inputs.
Connecting via LFE output from a surround receiver with THX or Dolby Digital.
Connecting via LFE output from a processor/multichannel amplifier.
Connecting to a receiver with full-range subwoofer outputs.
Steps for powering on the speakers and setting initial subwoofer gain levels.
Introduction to the Bass Optimization System for calibrating bass response to the room.
Guidelines for cleaning the speaker enclosure and grille.
Instructions for troubleshooting common issues and contacting service.
To Next Page
