Infinity kappa series Instructions

¤
Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA
516.674.4463 • FAX 516.682.3523 • www.infinitysystems.com
© 2005 Harman International Industries, Incorporated • Part No. KAPSEROM2/05
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Chateau-du-Loir
France
declare in o
wn responsibility that the products
descr
ibed in this o
wner’
s man
ual are in compliance
with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Klaus Lebherz
Har
man Consumer Group Inter
national
Chateau-du-Loir
, F
r
ance 2/05
A valid serial number is required for warranty coverage.
Features, specifications and appearance are subject to change without notice.
Intermount III patent no. 6,505,705.
42.7i
Type: 4" 2-Way
Speaker Impedance: 2 ohms
Power Handling: 50W RMS, 150W Peak
Sensitivity (2.83V, 1m): 93dB
Frequency Response: 75Hz – 25kHz
Mounting Depth: 1-13/16" (47mm)
Cut-Out Diameter: 3-7/16" (88mm)
52.7i
Type: 5-1⁄4" 2-Way
Speaker Impedance: 2 ohms
Power Handling: 55W RMS, 165W Peak
Sensitivity (2.83V, 1m): 94dB
Frequency Response: 55Hz – 25kHz
Mounting Depth: 2-1/16" (53mm)
Cut-Out Diameter: 4-11/16" (120mm)
62.7i
Type: 6-1⁄ 2" 2-Way
Speaker Impedance: 2 ohms
Power Handling: 75W RMS, 225W Peak
Sensitivity (2.83V, 1m): 95dB
Frequency Response: 45Hz – 25kHz
Mounting Depth: 2-3⁄16" (56mm)
Cut-Out Diameter: 5" (127mm)
63.7i
Type: 6-1⁄ 2" 3-Way
Speaker Impedance: 2 ohms
Power Handling: 75W RMS, 225W Peak
Sensitivity (2.83V, 1m): 95dB
Frequency Response: 45Hz – 25kHz
Mounting Depth: 2-3⁄16" (56mm)
Cut-Out Diameter: 5" (127mm)
652.7i
Type: 165mm 2-Way
Speaker Impedance: 2 ohms
Power Handling: 75W RMS, 225W Peak
Sensitivity (2.83V, 1m): 95dB
Frequency Response: 45Hz – 25kHz
Mounting Depth: 2-1/4" (58mm)
Cut-Out Diameter: 5-5/8" (143mm)
653.7i
Type: 165mm 3-Way
Speaker Impedance: 2 ohms
Power Handling: 75W RMS, 225W Peak
Sensitivity (2.83V, 1m): 95dB
Frequency Response: 45Hz – 25kHz
Mounting Depth: 2-1/4" (58mm)
Cut-Out Diameter: 5-5/8" (143mm)
692.7i
Type: 6" x 9" 2-Way
Speaker Impedance: 2 ohms
Power Handling: 110W RMS, 330W Peak
Sensitivity (2.83V, 1m): 95dB
Frequency Response: 35Hz – 25kHz
Mounting Depth: 3-3⁄ 16" (81mm)
Cut-Out Diameter: 5-7⁄ 8" x 8-11⁄ 16"
(150mm x 221mm)
693.7i
Type: 6" x 9" 3-Way
Speaker Impedance: 2 ohms
Power Handling: 110W RMS, 330W Peak
Sensitivity (2.83V, 1m): 95dB
Frequency Response: 35Hz – 25kHz
Mounting Depth: 3-3⁄ 16" (81mm)
Cut-Out Diameter: 5-7⁄ 8" x 8-1
1⁄16"
(150mm x 221mm)
32.7cf
Type: 3-1⁄2" 2-Way, Custom-Fit
Speaker Impedance: 2 ohms
Power Handling: 35 W RMS, 105W Peak
Sensitivity (2.83V, 1m): 95dB
Frequency Response: 85Hz – 25kHz
Mounting Depth:
1- 9/16" (40mm)
Cut-Out Diameter: 3-1/4" (83mm)
462.7cfp
Type: 4" x 6" 2-Way,
Custom-Fit Plate
Speaker Impedance: 2 ohms
Power Handling: 60W RMS, 180W Peak
Sensitivity (2.83V, 1m): 94dB
Frequency Response: 75Hz – 25kHz
Mounting Depth: 1- 13/16" (47mm)
Cut-Out Diameter: 3-5/8" x 5-3/8"
(93mm x 137mm)
682.7cf
Type: 6" x 8," 5" x 7" 2-Way,
Custom-Fit
Speaker Impedance: 2 ohms
Power Handling: 100W RMS, 300W Peak
Sensitivity (2.83V, 1m): 94dB
Frequency Response: 40Hz – 25kHz
Mounting Depth: 2-1/4" (58mm)
Cut-Out Diameter: 4-7/8" x 7-1⁄ 8"
(124mm x 181mm)
SPECIFICATIONS

Infinity kappa series Specifications

General

Tweeter	Edge-driven textile dome
Speaker Type	Component
Power Handling	100W RMS (300W peak)
Sensitivity	93dB
Frequency Response	45Hz
Woofer Size	6.5 inches
Tweeter Size	1 inch