Infinity MOUNTAIN BICYCLE - Helmets

2 2
Before You Ride Before You Ride
Safety Check List
2
14
Helmets
2
15
5. Bearings
– Ensure all bearings are lubricated, run freely and display no excess movement, grinding or rattling.
– Check headset, wheel bearings, pedal bearings and bottom bracket bearings.
6. Cranks and Pedals
– Ensure pedals are securely tightened to the cranks.
– Ensure cranks are securely tightened to the axle and are not bent.
7. Derailleurs
– Check that front and rear mechanisms are adjusted and function properly.
– Ensure control levers are securely attached.
– Ensure derailleurs, shift levers and control cables are properly lubricated.
8. Frame and Fork
– Check that the frame and fork are not bent or broken.
– If either are bent or broken, they should be replaced.
9. Accessories
– Ensure that all reflectors are properly fitted and not obscured.
Helmets
It is strongly advised that a properly fitting, ANSI or SNELL approved,
bicycle safety helmet be worn at all times when riding your bicycle. In
addition, if you are carrying a passenger in a child safety seat, they must
also be wearing a helmet.
The correct helmet should:
- be comfortable
- be lightweight
- have good ventilation
- fit correctly
Always wear a properly fitted helmet when riding a bicycle.