8
PHI 51 - PHI 21
SUBWOOFER CONNECTIONS
CHOOSE THE SUBWOOFER CONNECTION THAT IS MOST SUITABLE FOR YOUR RECEIVER/PROCESSOR
If you have a Dolby* Digital or DTS
®
receiver/processor with a
low-frequency-effects (LFE) or subwoofer output:
If your receiver/processor does not have subwoofer outputs for the left
and right channels or an LFE output:
If your receiver/processor does not contain a Dolby Digital or DTS
processor but has a subwoofer output:
Connect speaker wire from your receiver/amplifier to your speakers and
subwoofer using two sets of speaker wire.
LINE-LEVEL SUBWOOFER CONNECTIONS
SPEAKER-LEVEL SUBWOOFER CONNECTIONS
AMPLIFIER/PROCESSOR