Infinity PS312 - System Connections; Connecting to Digital Receivers; Connecting to Standard Receivers

5
PS312 (120V)
SYSTEM CONNECTIONS
If you have a Dolby
®
Digital or DTS
®
receiver/processor with a low-
frequency effects (LFE) or subwoofer output:
Set LFE/Normal switch to “LFE.”
If your receiver/processor does not contain a Dolby Digital or DTS processor
but has subwoofer outputs:
Receiver/Processor
Set LFE/Normal switch to “Normal.”
NOTE: If your receiver/processor has only one subwoofer output, you may use
either the L or R input.