Need help?Do you have a question about the Infinity Reference 5350A and is the answer not in the manual?
General| Bass boost | 0 - 6 dB |
|---|---|
| Damping factor | 6.3 |
| Amplifier class | D |
| Frequency range | 10 - 100000 Hz |
| Built-in crossover | Yes |
| Crossover frequency | 200 Hz |
| Audio output channels | 5.1 channels |
| Peak power per channel | 332 W |
| Signal-to-Noise Ratio (SNR) | 85 dB |
| Total Harmonic Distortion (THD) | 0.02 % |
| Dynamic power per channel (2 Ohm) | 89 W |
| RMS power output per channel (2 Ohm) | 60 W |
| RMS power output per channel (4 Ohm) | 50 W |
| XLR in | No |
| Audio (L/R) in | 2 |
| USB 2.0 ports quantity | 0 |
| Speakers connectivity type | Clamp terminals |
| Purpose | Car |
| Material | Aluminum |
| Cooling type | Passive |
| Product color | Aluminium, Grey |
| Volume control | Rotary |
| Remote control type | W |
| Connectivity technology | Wired |
| Maximum current | 75 A |
| DC input voltage | 10 - 14 V |
Weight and Dimensions| Depth | 421 mm |
|---|---|
| Width | 229 mm |
| Height | 68 mm |
Covers hearing safety, professional installation recommendation, and general tips.
Guidance on selecting a suitable and safe mounting location for the amplifier.
Instructions for connecting the amplifier's power and ground terminals.
Steps for connecting the remote turn-on lead and speaker wires.
Diagram and explanation for connecting subwoofers or voice coils in series.
Diagram and explanation for connecting subwoofers or voice coils in parallel.
Explains the 475a's capability for stereo, 3-channel, or bridged 2-channel operation.
Illustrates connecting the 475a to full-range speakers for stereo operation.
Shows connecting satellite speakers with a separate subwoofer amplifier.
Illustrates tri-mode setup with a subwoofer and satellite speakers.
Shows connecting full-range speakers in bridge mode.
Details 5-channel and 3-channel configurations for the 5350a amplifier.
Explains the INT and EXT modes for subwoofer signal input.
Guidance on setting crossover modes (FULL, HP, LP) for optimal speaker performance.
Procedure for adjusting input level to prevent distortion.
Instructions for installing and connecting the optional remote level control.
Explanation of Bass Boost control and interpretation of Status LEDs.
Diagnosing issues related to no audio output and the Protect LED status.
Troubleshooting distorted audio, low voltage, or overheating problems.
Addressing issues like lack of 'punch' due to improper speaker connections.
Detailed technical specifications for the 475a amplifier.
Detailed technical specifications for the 1300a amplifier.
Detailed technical specifications for the 5350a amplifier.
Detailed technical specifications for the 1600a amplifier.
Details the warranty coverage, limitations, and exclusions for USA customers.
Instructions on how to get warranty service and required documentation.
To Next Page
