Need help?Do you have a question about the Infinix X6826 and is the answer not in the manual?
Identifies the front-facing camera on the device.
Describes the function of the volume up and volume down buttons.
Details the power button and the integrated side fingerprint sensor.
The Infinix X6826 is a mobile phone designed for general use, featuring a standard set of functionalities for communication, photography, and multimedia. This user manual provides essential information for operating and maintaining the device, ensuring a smooth user experience.
The Infinix X6826 serves as a versatile communication device, allowing users to make calls, send messages, and access the internet. It is equipped with both front and rear cameras, enabling users to capture photos and videos. The device also includes a fingerprint sensor for secure and convenient unlocking. The internal components, as detailed in the explosion diagram, highlight its integrated design, combining various modules for optimal performance. These modules include the main board, display, cameras, speakers, and connectivity components, all working in concert to deliver a comprehensive mobile experience. The phone supports dual SIM cards and an SD card, offering flexibility for network usage and expandable storage.
Getting Started: To begin using the Infinix X6826, users must first install their SIM and/or SD cards. This process requires the device to be powered off to ensure proper installation and prevent damage. The manual provides a clear visual guide for inserting the cards into the designated tray. Once the cards are in place, the device can be powered on, allowing access to network services and stored media.
Basic Operation: The phone features a straightforward interface with easily identifiable physical keys. The volume keys (Volume + and Volume -) are located on the side, allowing users to adjust audio levels for calls, media, and notifications. Below the volume keys is the Power key, which also integrates a side fingerprint sensor. This dual-function key is used to power the device on/off, lock/unlock the screen, and authenticate user identity through fingerprint recognition. The front camera is positioned at the top of the display, facilitating video calls and selfies.
Charging the Device: The Infinix X6826 can be charged using a standard INFINIX charger and USB cable. The manual explicitly states the importance of using only INFINIX-branded accessories for charging. Using third-party chargers or cables may damage the device and void the warranty. The charging process involves connecting the USB cable to the phone's charging port and then to either a wall adapter or a computer.
Multimedia and Connectivity: The device is designed to support various multimedia functions, including audio playback and video viewing. The presence of an audio jack rubber and a down speaker indicates support for external audio devices and clear sound output. The coaxial cable and USB rubber components suggest robust connectivity options, enabling data transfer and external peripheral connections. The inclusion of a motor implies haptic feedback capabilities, enhancing the user's interactive experience with vibrations for notifications and touch responses.
Security Features: The integrated side fingerprint sensor provides a convenient and secure method for unlocking the device and authenticating transactions. This feature enhances user privacy and data protection by ensuring that only authorized individuals can access the phone.
Component Overview: The explosion diagram provides a detailed breakdown of the Infinix X6826's internal components, which is useful for understanding the device's construction and potential repair needs. Key components include the TP+LCM (Touch Panel + Liquid Crystal Module) for the display, front and middle housings, main board, and various cameras (8M and 50M). The diagram also identifies smaller but crucial parts like the light guide film, camera rubber, proximity sensor rubber, and conductive foam, which are essential for the device's functionality and protection.
Heat Management: The device incorporates heat dissipation components such as heat dissipation copper foil and heat dissipation film. These elements are crucial for managing the internal temperature of the phone during operation, preventing overheating, and ensuring the longevity of internal components. Proper heat management is vital for maintaining stable performance and preventing damage to sensitive electronics.
Structural Integrity: The inclusion of various screws (3.5 screw, 2.5 screw) and rubber components (LCM connector rubber, battery connector rubber, USB rubber, audio jack rubber) indicates a design focused on securing internal parts and providing cushioning against impacts. The main board frame and battery cover further contribute to the structural integrity, protecting the delicate internal circuitry from external elements and physical stress.
FCC Compliance and SAR Information: The manual includes important information regarding FCC compliance and Specific Absorption Rate (SAR). The device adheres to FCC rules, ensuring it does not cause harmful interference and accepts any received interference. Users are advised that changes or modifications not expressly approved by the responsible party could void their authority to operate the equipment.
The SAR information statement details that the wireless phone is a radio transmitter and receiver designed to meet the RF energy exposure limits set by the U.S. Government. The device operates at multiple power levels, adjusting output to reach the network efficiently. SAR tests are conducted in various positions (at the ear and body-worn) to ensure compliance with safety guidelines. The maximum SAR values for this model are provided, confirming that the device meets government requirements for safe exposure.
Body-worn Operation Guidelines: For body-worn use, the manual specifies a minimum separation distance of 10mm between the user's body and the handset, including the antenna, to comply with RF exposure requirements. It also advises against using third-party belt-clips, holsters, and similar accessories that contain metallic components, as these may not meet RF exposure requirements. Users are encouraged to use only supplied or approved antennas to maintain compliance.
Software and Licensing: The Infinix X6826 runs on the Android™ operating system, which is a trademark of Google LLC. The device also incorporates DTS audio technology, with patent information available online. This indicates that the phone is designed to provide an enhanced audio experience, leveraging licensed technologies for sound processing.
In summary, the Infinix X6826 is a modern mobile phone designed for reliable performance and user convenience, with clear guidelines for installation, operation, and maintenance, all while adhering to important safety and regulatory standards.
General| Resolution | 1080 x 2460 pixels |
|---|---|
| Front Camera | 16 MP |
| Battery | 5000 mAh |
| Network | GSM / HSPA / LTE |
| SIM | Dual SIM (Nano-SIM, dual stand-by) |
| RAM | 8GB |
| Storage | 128GB |
| Rear Camera | 2MP |
| Operating System | Android 11 (XOS 7.6) |
| Colors | Black |
To Next Page
