InFocus LightPro IN1036 - Page 49

www.infocus.com
Display
49
Select the computer system manually
1. PresstheMENUbuttononremotecontrol
andtheOSDdisplays.Press

buttonto
pointtotheInputicon,press

buttonor
<OK>buttonandtheInputmenudisplays.
2. Press

buttontoselectSystemSignal
Format,thenpress<OK>button.
3. Press

buttontoselectrequiredsystem
signalformat,thenpress<OK>buttonto
conrmyourselection.
Video
Selectthisfunctiontosetresolutionofinput
signaltobecompatiblewiththePC.
SetVideo/S-videoinputsignalcoloursystem
orComponentinputsignalscanningmode.
1. Press

buttontoselect[System]menu.
2. Press<OK>button.
3. Press

buttontoselectwantedsystem.
Display
System
1024x768,75HZ
- - - -
- - - -
- - - -
1280x768,75HZ
SystemforPCsignal
Display
System
AUTO
PAL
SECAM
NTSC
NTSC4.43
PAL.M
PAL.N
PAL60
SystemforVideosignal
RGB input signal
Displaythecompatiblename
inputsignalname.
Whenprojectorhasno
compatiblesignalwithone
fromconnectedPC,thePC
canadjustautomatically
torunandAutoappearon
thesystem.Iftheimageis
notprojectedoutcorrectly,
pleaseadjustittomatch
yourcomputermanually.
Nosignalinputcomefrom
PC.Pleasecheckthe
connections.
Video input signal
Whenprojectorselectthe
inputsignalcoloursystem
automatically.Set[PAL-M]
or[PAL-N]manually.
Whenprojectorcannot
displayimagescorrectly
in[Auto],pleaseset
inputsignalcoloursystem
manually.
1024x768
60HZ,itp
Auto
-----
Auto
[PAL]
[SECAM]
[NTSC]
[NTSC4.43]
[PAL-M]
[PAL-N]
[PAL60]