InFocus LightPro IN1036 - Maintenance and Cleaning (Continued); Resetting the Filter Counter; Lamp Replacement Procedure

www.infocus.com
Maintenance and cleaning
90
Note
Resettheltercounterafterits
cleaningorreplacement.
Reset the lter counter
1. PressMENUbuttonandtheOSDdisplays.
Press

buttontoselectExpandmenu,
press

buttonorOK.
2. Press

buttontoselect"FilterCounter",
press

buttonorOK.Press

button
toselect“Filtercounterreset”andpress
OK.The“Resetltercounter?”message
displays.SelectYestoproceed.
3. Inanotherpop-updialoguebox,selectYes
toresettheltercounter.
Recommendations
Pleasedonotuseyourprojectoratplace
ofdustandsmoke.Thismayaectsimage
quality.Usingyourprojectorinplaceofdust
andsmokemayleadtopilingdustsonlens,
LCDpanel,andlenscomponentswithinit.In
caselikethis,callyourdealerorservicecentre
forcorrectcleaning.
Lamp replacement
Thelampwarningicondisplayswhenits
usagetimearemorethanthelifeofthe
projectorminus300Handlessthanthelifeof
theprojector.
Thelampreplacementicondisplayswhen
itsusagetimearemorethanthelifeofthe
projector.
Lamp model
Yourprojector’slampisaconsumable.You
canconrmyourusagetimeaccordingto
"Lightsourcecounter"ontheInfo.menuin
page73.
You'dbetteraskaprofessionaltechnicianto
replacethelamp.contactyourdealerforhelp.
Pleasecallyourdealertoreplacethelamp.
Recommendations
DONOTreplacethelampwhenitissohot.
Makesuretoreplaceitatlease1hourlater
afterusingit.
Theinternalcoveroflampmodelisgettinghot
inuse.Takecare,oryoumaygetburned.
Expand
Filter counter
0H
200H
On
Filter counter
Filter counter reset
Filter check
Timer
Thelampmodel
Thelampwarningicon
Thelampreplacementicon
Lampreplacement