InFocus LightPro IN1036 - HDMI Setup

www.infocus.com
Setting
57
Note
• HDMIoptioncanbechosen
onlyinHDMI1andHDMI2
channel.
HDMI setup
Whentheexternaldeviceisconnectedtothe
HDMIterminaloftheprojector,andtheimages
cannotbeprojectednormally,pleaseswitch
ontheImageorSoundsetting.
Press<MENU>buttonontheremotecontrol
oronthetopcontrolpaneltodisplaytheOSD
menu.Press

buttontoselectthesetting
menu,thenpress<OK>or

buttontoenter
thesub-menu.
1. Press

buttontoselect[HDMIsetup]
menu.
2. Press<OK>button.
• Display[HDMIsetup]instantly.
3. Press

buttontoselect[Image]or
[Sound].
• Press<OK>button.
Image
[64-940]
Whenexternaldevice(suchas:abluraydiscplayer)isconnectedto
theHDMIsetupterminal.
[0-1023]
Whentheoutputofanexternaldevice(suchasacomputer),viaa
conversioncableorasimilarcable,isconnectedtotheHDMIsetup
terminal.
Selectthisoptionwhentheoutputofthepcoranyotherdeviceis
connectedtotheHDMIsetupterminalalso.
Sound
[HDMI]
WhenconnecttotheHDMIcabletotransmitimagesandaudiowhile
theusersdonotneedconnecttoaudiosignalseparately.
[Computer]
Whentheoutputofanexternaldevice(suchasacomputer),viaa
conversioncableorasimilarcable,isconnectedtotheHDMIterminal.
TheaudiosignalwouldbeoutputaccordingtheconnectionofAUDIO
INterminal.
HDMI EQ setup
Mode0-3
ChangetheHDMIreceptionlevelaccordingtotheAVdevice
connectedtotheHDMIinputterminal.Ifnoiseappearsintheimageor
theimagedoesnotappear,changethesettings.
Direct power on
Light source mode
...
Setting
Standby mode
High land
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
HDMISetup