InFocus LightPro IN1036 - Appendix; Troubleshooting Guide

www.infocus.com
Appendix
93
Appendix
Troubleshooting
Check the following before calling your dealer or service centre:
Troubleshooting Solution
Poweronfailure
• PlugthepowercordofyourprojectorinanACsocket.
• MakesurethePOWERlightindicatorturnsred.
• RestartyourprojectoruntilthePOWERlightindicatorturns
red.Itindicatesyourprojectorisreadyforpoweronagain.
• Checkthelamp.
• DisabletheKeyLockfunctionofyourprojector.
Logoscreendisplay
failure
• MakesuretheOandCountdownOisselectedinthe
Displayfunction.
TheLogoscreen
diersfromthe
standardsettings
• MakesureyoudidnotselectUserorOintheLogo
Screen.
Inputsignalswitch
(ordonotswitch)
automatically
• MakesureyouhavecorrectlysetuptheInputSearch
function.
PressINPUTbutton
duringpoweronanda
non-inputmodeicon
displays
• Thisisalterorlampreplacementalerts.
Anon-inputorlamp
modeicondisplays
• Thisisalterreplacementalerts.
Imagelooksfuzzy
• Adjustfocusofyourprojector.
• Provideproperprojectiondistance.
• Theprojectionlensrequirescleaning.
• Movingyourprojectorfromacolderenvironmenttoa
hotteronemayresultincondensingonthelens.Ifthis
isthecase,waituntilthecondensingwaterevaporated
beforepoweringonyourprojector.
Imagemirrorreected • ChecktheCeiling/Rearsettings.
Imageturnsupside
down
• ChecktheCeilingsettings.