InFocus LiteShow Quick Start Guide 11
Step 4: Project
Following the installation of the LiteShow software, the LiteShow Manager application opens. The LiteShow-enabled
projector that you installed the LiteShow Manager software for should appear in the list window.
Click the Scan button if you are not seeing your LiteShow-enabled projector. Within moments, the Projector list
should populate with the names of LiteShow adapters that are in range. To project via LiteShow, simply highlight your
LiteShow-enabled projector and click the Project button.
Note: If you have a wireless driver that only supports the Basic Feature set, the Scan button is disabled. See "Trouble-
shooting" in the User’s Guide or consult the online Help for more information.
LiteShow Manager
display LiteShow adapter settings
scan for available projectors on other networks
list of LiteShow projectors
connect to selected LiteShow projector
hide/display LiteShow Manager user preferences
close LiteShow Manager
display LiteShow help
To Next Page
Loading...
