InFocus LiteShow - Installation

InFocus LiteShow Quick Start Guide 13
Regarding the 3COM Adapter
If you purchased the 3COM/LiteShow bundled product, this topic is for you.
Installation
We recommend that you complete the following steps to install the 3COM wireless adapter:
1 Insert LiteShow CD and click on the 3COM Wireless PC Card option.
2 Wait to be prompted to install the 3COM wireless adapter.
3 When the application asks you to insert the 3COM wireless adapter, do so.
4 Follow the rest of the instructions for install.
Although the above procedure is recommended, the 3COM wireless adapter can also be installed in advance of insert-
ing the LiteShow CD.
1 Insert the 3COM wireless adapter. The Windows Hardware Wizard displays.
2 To finish the install, simply click the Next button on the first screen and on the next screen.
3 Make sure that the check box is enabled for CD-ROM drives.
4 Make sure the LiteShow CD is in the CD-ROM drive on your computer.
5 Finish the Wizard by clicking Next until the driver is installed. A Windows dialog box, "Digital Signature Not
Found" may display during this process. The install will work fine if the Yes button is clicked when this dialog box
displays.