How to fix InFocus X16 Projector that does not turn on?
If your InFocus Projector doesn't turn on, first ensure the power cord is securely plugged into both the projector's AC inlet and a working power outlet, and that the outlet switch is on. Also, if the projector was recently turned off, it may be in the cooling down process. Wait until this process is complete before attempting to turn it on again.
What to do if my InFocus Projector has no picture?
If your InFocus Projector shows no picture, first ensure that the video source is turned on and the signal cable is correctly connected. Check the connection between the projector and the input signal device. Make sure the correct input signal is selected using the SOURCE key on the projector or remote. Also, verify that the lens cover is open.
Display| native resolution | 800 x 600 |
|---|---|
| display technology | 0.55” LVDS DLP DMD |
| brightness | 2400 lm |
Connectivity| input sources | VGA (HD15), S-video, Composite Video, Audio (3.5mm), RS232 |
|---|---|
| output sources | VGA (HD15) |
| control | PC control through RS232 |
Video Compatibility| computer compatibility | VGA(640x480), SVGA(800x600), XGA(1024x768), SXGA(1280x1024), SXGA+(1400x1050) |
|---|---|
| video compatibility | NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM, SDTV(480i/576i), EDTV(480p/756p), HDTV(720p1080i) |
| aspect ratio | 4:3/16:9 |
Projection| minimum projection distance | 1.5 ~ 6m |
|---|---|
| lens offset | 120% |
| image size | 0.75m ~ 6.5m (27” ~ 252") |
Power and Consumption| power consumption | 285W (typical) / 5W in standby |
|---|---|
| power supply | 100~240Vac, 50/60Hz |
| lamp | 185W / 4000 hours (Eco mode) |
Operating Environment| operating temperature | 5 – 35°C |
|---|---|
| audible noise | 29dB |
| brightness uniformity | 80% |
Weight and Dimensions| product dimensions | 225 x 113 x 264mm |
|---|---|
| product weight | 5.3 lbs (2.4 kg) |
| product color | Black |
To Next Page
