Need help?Do you have a question about the InFocus X8 and is the answer not in the manual?
Advises on power cords, authorized lamps, ceiling mounts, and mercury lamps.
Instructions for handling lamp rupture, keeping areas clear.
Steps to connect computer via M1-D/A connector and power cable.
Steps to turn on projector/computer and ensure image display.
Adjusting vertical keystone and image settings like Contrast/Brightness.
Connecting S-video, composite video, and audio cables.
Steps to turn on video device and projector for image display.
Adjusting zoom, focus, volume, and keystone via keypad.
Accessing Picture menu for Contrast, Brightness, Color, Tint.
Steps for turning off the projector and cooling the lamp.
Explains automatic lamp off and blank screen features for energy saving.
Explains projector status lights and their meanings for troubleshooting.
Solutions for when no startup screen appears on the projector.
Solutions for when only the startup screen is visible and no image is shown.
Adjusting computer refresh rate for "Signal out of range" errors.
Setting computer resolution to match projector's native resolution.
Setting Macintosh display resolution to 1280x800 for clarity.
Disabling "Extend my Windows Desktop" for proper display.
Adjusting keystone for squareness and sharpness for image clarity.
Changing aspect ratio to 16:9 for widescreen content display.
Using Ceiling/Rear settings for correct image orientation.
To Next Page
General
