Forw
ard
Please read this manual carefully and make a full understanding before operating.
Due to t h e limited pages we cannot answer
1
the questions but this
man
u
can
help
you avoid unnecessary mistakes during operating the new machines.Please pay
speci
attention to
the"Warning
"
f
you don't stick to the instructions you may have
your
machine damaged.
Excuse for not informing of the
teratio
n
for techniques of the products change
all the
time.
Please follow the operating precedures described in this
manua
B
y
doing so you'll
save your time and energ
y
f
any
problem
or
fa t occurs Please
contact our authorized
service centre without delay.
If any machine parts need to be replaced Please use those produced in our factory
to ensure an
effective
operation and to increase
service
life.
Securit
y
Notes
Before
startingthe
machine Please
take a
check before operation
or the safe operation.
Do not place
anY
inflammable substance near the air compressor.
Do not inject the compressed air to man and animals
Keep children or animal
s
away
from the compressor or
au
x
ar
y
fac
ties.
Don't touch the machine or exhaust pipe during
operation it remains in very
high
temperature
.
The technical service center of our factory is the o
y organization that has
the
right to
confirm
whether the product in question is within the guaranty scope.
The operator should know the correct operation of the machine and how to turn it
off immediately.
DO not move the machine when the air container
s
t
contains in
compressed
condition.
Before
repairingespecially
before disassembling the machinethe power should be
turned off and the
compressed
gas
sho d
released front the gas container. If the power
is not turned off the air compressor may start
suddenl
y
I
n
the evening if the
unstable
voltage in the power grid may damage the motor in the
machine.
The following two points should be noted when the air compressor is used
for
spraying painting.
a.Do not operate the air compressor in the airtight space or in the place
where
there is fir
e.
b.The
air compressor should be operated in the well ventilated place.
2|English
To Next Page
Loading...