compressor will be frayed and the axle head will be
destroye
d
f
too high it may
cause
the lube to spray and the loan of the compressor to
increase.
Highest
level
Fig.1
Lowest
level
b.The
ideallube
for the compressor should bein a general wayhigh grade
with
antiovidant in not easy to become thick because of oxygenating, not easy to froth with
lit
e
carbon left and high ignition
poin
Usuall
y
the 13#air compressor
o
is
usd.the
19#air compressor
o
is used in winte
Note
s
before
operating
a.Plug in the power plug to the matched
ou
e
b.Check the tightress of the belt and see if ue can remove pulley
ea
s
y
by
hand.
c.Do use the air switch (Figure 2)to start or stop the compressor according to
the
button position marked on the shell of air switch,for the compressed air in the pipeline
w
exhaust automatically when the air switch break and then the compressor
could
be started with
lit
e
burden next time prevent the motor from
damage.
c. Safety Valve
The
air-compressor
is
equipped
with
safety valve as
the
protective
device
to
prevent
from
excessive pressure
in the
gas tank. The safety valve has
already been adjusted according
to the
designing standard
of
"Pressure
Containers". Please don't adjust
it at
discretion. Please advise
the
maintenance
services
of our
company
or
distributors
to do for you
if
adjustment
is
necessary.
To
assure
that the
function
of the
safety valve
is in
normal state. Please drag
the gas release
ring at
least once a week (Figure 3).
Fig.2 Fig.3
4|English
To Next Page
Loading...