Measurement Functions Measurement SequenceIcons
Single-mode Measurement
Area Measurement
Volume Measurement
Area Summation Function
Height Measurement 1
Height Measurement 2
Addition and Subtractio Functions
+ The current measurement result is
added to the previous one
- The current measurement result is
subtracted from the previous one, as
shown in figure H
Storage and Recall of Measurement Results
The equipment will automatically store the
last 50 measurement results at reverse
seqence. On standby state,shown in
figure (,pressing+or-buttons will recall
historical measurement results with the
first reading as record No.1 and so on
When 50-record space is full,the
equipment will directly delete the first
reading and store the current reading
To Next Page
Loading...